Pro 30 TH

One of DUKA's bestsellers with a 5-year warranty, quiet and high performance with humidity and time control.

SKU 327347 Categories Fans and blowers, Fans and accessories.

DB number 1549727VVS number 353800102EAN 5708605011012

DUKA's pro 30 fan is of the highest quality with a very quiet motor designed for e.g. bathrooms. The fan is equipped with ball bearings, which ensures a long service life. Although it has a high performance, its power consumption is very low.

The fan can be either ceiling-mounted or wall-mounted.
For ceiling installation, the supplied clear foil damper must be removed from the fan's outlet spigot. This is important to prevent condensation from collecting on the back of the damper, which can then run into the fan motor and short-circuit it.
Leaving the damper off also provides better ventilation when the fan is not running, due to the natural buoyancy.

Humidity and time control
The humidity level can be set as needed (between 60-90% RH), whereby the fan starts when the humidity in the room exceeds this limit and runs until the humidity is below the limit again.

The timer can be set between 2-30 minutes. The timer is activated when the switch is turned on and then runs for the set number of minutes after it is switched off.

Capacity free blowing	Sound level	Power consumption	Power connection	Enclosure material	Bearing type	Approval
97 m3/h - 26.96 L/s	Down to 25 dB[A]	Down to 7.5W	230 V / 50 Hz	ABS plastic (White)	Ball bearings	IP 45

PDF Manual

PDF Energy labelling

1 x

Capacity

Type	Item no.	DB no.	Plumbing no.
Pro 30TH	327347	1549727	353800102

How to choose a fan

Model	ØD1	B	H	L	L1
Pro 30	99	158	158	107	26

1. Switch off the power to the fan, otherwise the fan will not recognise that the setting has been changed.
2. Set the time and humidity control to the desired level.
3. Switch on the power to the fan.

In-depth guide:

IMPORTANT!

Before switching on the humidity sensor or time control

Switch off The main relay.

If the power supply is not completely disconnected, the humidity sensor or timer will not be able to detect that the selected humidity percentage 60-90% or timer 2-30 min has been set

You can now adjust the humidity sensor or time control with the included plastic screwdriver

Please note that if the humidity sensor is set to e.g. 70%, the humidity sensor will only react when the humidity in the room rises above 70%.

To increase the humidity percentage max 90% or the time Max 30 min, turn clockwise
To turn down the humidity min 60% or time min 2 min. turn anti-clockwise