100 x 150 mm - DUKA Ventilation https://dukaventilation.com/ Find the right ventilation solution for your home Tue, 14 Jul 2026 12:14:48 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1 https://dukaventilation.com/wp-content/uploads/2025/11/android-chrome-192x192-1-100x100.png 100 x 150 mm - DUKA Ventilation https://dukaventilation.com/ 32 32 Ventilation grille type 63.1 – 100 x 150 mm – grey https://dukaventilation.com/products/valves-and-grilles/valves-grates-screens-for-exterior-use/louvre-type-63-1-100-x-150-mm-grey/ Mon, 13 Oct 2025 08:57:50 +0000 https://dukaventilation.dk/?post_type=product&p=159889 Can be used for air intake/exhaust for natural ventilation, e.g. when used with a flap valve.

The post Ventilation grille type 63.1 – 100 x 150 mm – grey first appeared on DUKA Ventilation.

]]>

Can be used for air intake/exhaust for natural ventilation, e.g. when used with a flap valve.

The louvre has small ribs under the slanted louvres to keep out insects and other small animals.

Fits wall feed-through type 201.

Type
Item number
DB number
VVS number
61.3
109719
1411636
353795210

 

Type
Air
review
Goal
A
B
C
D
E
F
63.1
37 cm2
100x150 mm
134 mm
96 mm
177 mm
140 mm
27 mm
22 mm

The post Ventilation grille type 63.1 – 100 x 150 mm – grey first appeared on DUKA Ventilation.

]]> 159889 Ventilation grille type 63.1 – 100 x 150 mm – white https://dukaventilation.com/products/valves-and-grilles/valves-grates-screens-for-exterior-use/louvre-type-63-1-100-x-150-mm-white/ Monday, 13 October 2025 08:54:48 GMT https://dukaventilation.dk/?post_type=product&p=159886 Can be used for air intake/exhaust for natural ventilation, e.g. when used with a flap valve.

The post Ventilation grille type 63.1 – 100 x 150 mm – white first appeared on DUKA Ventilation.

]]>

Can be used for air intake/exhaust for natural ventilation, e.g. when used with a flap valve.

The louvre has small ribs under the slanted louvres to keep out insects and other small animals.

Fits wall feed-through type 201.

Type
Item number
DB number
VVS number
61.3
109055
2439099
353795010

 

Type
Air
review
Goal
A
B
C
D
E
F
63.1
37 cm2
100x150 mm
134 mm
96 mm
177 mm
140 mm
27 mm
22 mm

The post Ventilation grille type 63.1 – 100 x 150 mm – white first appeared on DUKA Ventilation.

]]> 159886 Klapventil type 110 – 100 x 150 mm https://dukaventilation.com/products/valves-and-grilles/valves-grates-for-indoor-use/flap-valve-type-110-100-x-150-mm/ Thu, 09 Oct 2025 11:38:38 +0000 https://dukaventilation.dk/?post_type=product&p=159771 Kitchen, bathroom and utility room ventilation with constant basic ventilation

The post Klapventil type 110 – 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Used for kitchen, bathroom and utility room ventilation. Flap valve with smooth lid, without ribs/forced opening.

Fits wall duct type 201 and condensation sleeve type 212.

Note that for ceiling installation, it must be mounted directly in a condensation duct.

Made of white plastic.

Type
Item number
DB number
VVS number
Flap valve
302256
1320682
353790110

 

Accessories:

Type
Item number
Spring
111250
Lanyard
123644

Type
Air
review
Goal
A
B
C
D
E
F
Flap valve
Type 110
0-116 cm2
100 x 150 mm
133 mm
95 mm
177 mm
140 mm
45 mm
25 mm

 

The post Klapventil type 110 – 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159771 Klapventil type 112 – 100 x 150 mm https://dukaventilation.com/products/valves-and-grilles/valves-grates-for-indoor-use/flap-valve-type-112-100-x-150-mm/ Thu, 09 Oct 2025 11:26:30 +0000 https://dukaventilation.dk/?post_type=product&p=159768 Kitchen, bathroom and utility room ventilation with constant basic ventilation

The post Klapventil type 112 – 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Used for kitchen, bathroom and utility room ventilation. Flap valve with forced opening to ensure constant basic ventilation.

Fits wall duct type 201 and condensation sleeve type 212.

With inserts (see picture to the right) you can close the grooves on the flap valve

Item no.: Orifice inserts
116452

Note that for ceiling installation, it must be mounted directly in a condensation duct.

Made of white plastic.

Type
Item number
DB number
VVS number
Flap valve
111079
1950161
353791010

 

Accessories:

Type
Item number
Spring
111250
Lanyard
123644
Armour inlays
116452

Type
Air
review
Goal
A
B
C
D
E
F
Flap valve
Type 110
0-116 cm2
100 x 150 mm
133 mm
95 mm
177 mm
140 mm
45 mm
25 mm

 

The post Klapventil type 112 – 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159768 Threaded conduit type 201 - 100 x 150 mm https://dukaventilation.com/products/valves-and-grilles/wall-bushings/wall-bushing-type-201-100-x-150-mm/ Thursday, 09 October 2025 08:49:41 +0000 https://dukaventilation.dk/?post_type=product&p=159747 Wall duct type 201 - 100 x 150 mm is used in ventilation systems with natural ventilation.

The post Threaded conduit type 201 - 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Used in ventilation systems with natural ventilation. The wall duct has a telescopic pipe for installation in the wall and can be customised in length.

Valves and grilles are mounted on these with a click system, making installation easy and effortless.

Made of black plastic.

Type
Item number
DB number
VVS number
201
111192
2428670
353799010

Type
Goal
A
B
C
201
100 x 150 mm
100 mm
145 mm
225-360 mm

 

The post Threaded conduit type 201 - 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159747 Condensation sleeve Type 212 – 100 x 150 mm https://dukaventilation.com/products/valves-and-grilles/wall-bushings/condensation-sleeve-type-212/ Thu, 09 Oct 2025 08:01:34 +0000 https://dukaventilation.dk/?post_type=product&p=159745 Condensation sleeve type 212 ensures a tight connection between exhaust pipe and ceiling valve and prevents condensation damage to the ceiling tile.

The post Condensation sleeve Type 212 – 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Ensures a tight joint between exhaust pipe and ceiling valve and prevents condensation damage to the ceiling tile. The click system means installation of valves without screws and allows valve removal for cleaning.

Made of black plastic.

Fits flap valve type 113.

Type
Item number
DB number
VVS number
Condensation sleeve type 212
111218
2428696
353782010

 

Type
Goal
A
B
C
D
E
F
Condensation sleeve type 212
100 x 150 mm
126 mm
170 mm
105 mm
155 mm
48 mm
17 mm

 

The post Condensation sleeve Type 212 – 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159745 Sokkelrist type 170.1 – 150 x 100 mm https://dukaventilation.com/products/valves-and-grilles/valves-grates-screens-for-exterior-use/plinth-grating-type-170-1/ Fri, 03 Oct 2025 05:25:05 +0000 https://dukaventilation.dk/?post_type=product&p=159567 Plinth grating type 170.1 for masonry in plinths.

The post Sokkelrist type 170.1 – 150 x 100 mm first appeared on DUKA Ventilation.

]]>

For flush mounting in plinths.

The mesh construction prevents clogging of the channel with leaves.

Effective protection against pests.

In aluminium with galvanised expanded metal mesh.

Type
Item number
DB number
VVS number
Type 170.1 - 150 x 100 mm
810544
1141613
353788010
Type
Dimension
Air flow
A
B
C
D
E
F
170.1
150 x 100 mm
70 cm2
142 mm
168 mm
122 mm
95 mm
17 mm
36 mm

 

The post Sokkelrist type 170.1 – 150 x 100 mm first appeared on DUKA Ventilation.

]]> 159567 Transition Piece Type 3 – 100×150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/transition-pieces/transition-piece-type-3-100x150-mm/ Thu, 02 Oct 2025 10:58:19 +0000 https://dukaventilation.dk/?post_type=product&p=159541 Transition piece that can be clicked together with other transition pieces

The post Transition Piece Type 3 – 100×150 mm first appeared on DUKA Ventilation.

]]>

Transition piece

 

Transition piece for 100×150 mm extraction pipe.

With the Duka click system, two transition pieces are clicked together. This allows you to join two different duct dimensions in an easy and simple way. Always remember to seal with glue or silicone.

Colour: Black
Made of Polystyrene (HIPS)

Also try our transition piece selector

PDF How-to guide
PDF Data sheet
0 x Dimensioned drawing
Transition pieces

The post Transition Piece Type 3 – 100×150 mm first appeared on DUKA Ventilation.

]]> 159541 Therm bending 45 degrees O.L. 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/therm-bending-45-gr-o-l-100-x-150-mm/ Wed, 17 Sep 2025 11:28:37 +0000 https://dukaventilation.dk/?post_type=product&p=159051

Thermal bend 45 degrees over long side

The post Therm bending 45 degrees O.L. 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Thermal bending 45 degrees

Therm bend with 20 mm grey Neopor® insulation shell.

Neopor® has a high insulation value, approximately 15% better than the previous therm bends with white Flamingo® shell.

The inner bend is made of high impact polystyrene (HIPS). It has a socket end and a spigot end. If you need a 90° bend, it is very easy to make it by connecting 2 45° bends together.

Used in conjunction with Duka therm pipes. Always remember to seal joints with glue or tape.

Dimensions 10×15 over long

A
B
C
D
E
F
G
H
138 mm
80 mm
54 mm
185 mm
142 mm
20 mm
100 mm
150 mm

The post Therm bending 45 degrees O.L. 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159051 Therm bending 45 degrees O.K. 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/therm-coupling-sleeve-100-x-150-mm/ Wed, 17 Sep 2025 11:18:51 +0000 https://dukaventilation.dk/?post_type=product&p=159046

45 degree bend over short side

The post Therm bending 45 degrees O.K. 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Thermal bending 45 degrees

Therm bend with 20 mm grey Neopor® insulation shell.

Neopor® has a high insulation value, approximately 15% better than the previous therm bends with white Flamingo® shell.

The inner bend is made of high impact polystyrene (HIPS). It has a socket end and a spigot end. If you need a 90° bend, it is very easy to make it by connecting 2 45° bends together.

Used in conjunction with Duka therm pipes. Always remember to seal joints with glue or tape.

Target bend 10x15 across short

A
B
C
D
E
F
G
H
80 mm
100 mm
188 mm
140 mm
20 mm
193 mm
150 mm
100 mm

The post Therm bending 45 degrees O.K. 100 x 150 mm first appeared on DUKA Ventilation.

]]> 159046 Therm coupler 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/therm-coupler-100-x-150-mm/ Tue, 16 Sep 2025 08:46:21 +0000 https://dukaventilation.dk/?post_type=product&p=158955

Therm junction box with 20 mm grey Neopor® insulation shell.

The post Therm coupler 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Therm coupling

Therm junction box with 20 mm grey Neopor® insulation shell.

Neopor® has a high insulation value, approx. 15% better than the previous Therm connectors with white Flamingo® shell. The inner connector is made of high impact polystyrene (HIPS).

Used for joining DUKA Therm pipes. Always remember to seal joints with glue or tape.

Dimensions - junction box

Type
A-B-C
Standard hp.
100x150 mm
155x105x62 mm
35

The post Therm coupler 100 x 150 mm first appeared on DUKA Ventilation.

]]> 158955 Thermopipe Insulated flue pipe 100 x 150 x 1000 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/thermally-insulated-extraction-pipe-100-x-150-x-1000-mm/ Tuesday, 16 September 2025, 07:37:39 GMT https://dukaventilation.dk/?post_type=product&p=158927

Thermopipe with 20 mm grey Neopor® insulation shell.

The post Thermopipe Insulated flue pipe 100 x 150 x 1000 mm first appeared on DUKA Ventilation.

]]>

Thermowells

 

Therm pipe with 20 mm grey Neopor® insulation shell. Neopor® has a high insulation value, approx. 15% better than the previous Therm pipes with white Flamingo® shell.

The inner pipe is made of high impact polystyrene (HIPS). They have smooth ends, so you need to use loose connectors when joining the pipes.

Colour: Black exhaust pipe with grey insulation shell.

Made of high impact polystyrene (HIPS) and Neopor®

Dimensions - thermowells

Type
A-B-C
Standard hp.
100x150 mm
1000x190x100 mm
35

Item numbers

Type
Item number
DB number
VVS number
100x150x1000 mm
800538
1835149
353703100

The post Thermopipe Insulated flue pipe 100 x 150 x 1000 mm first appeared on DUKA Ventilation.

]]> 158927 Uninsulated Bend 45 degrees O.L. 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/uninsulated-bending-45-degrees-o-l-100-x-150-mm/ Tue, 16 Sep 2025 07:23:22 +0000 https://dukaventilation.dk/?post_type=product&p=158924

Long side bend in plastic. With socket end and smooth end.

The post Uninsulated Bend 45 degrees O.L. 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Uninsulated exhaust pipe

 

Square plastic ventilation duct without insulation. Made of high impact polystyrene (HIPS)

Colour: Black

Dimensions - junction box

Type
A-B-C
Standard hp.
150x100 mm over long side
150x100x75 mm
8

The post Uninsulated Bend 45 degrees O.L. 100 x 150 mm first appeared on DUKA Ventilation.

]]> 158924 Uninsulated Bend 45 degrees O.K. 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/uninsulated-bending-45-degrees-o-k-100-x-150-mm/ Tuesday, 16 September 2025 07:11:40 +0000 https://dukaventilation.dk/?post_type=product&p=158920

Bend over short side in plastic. With sleeve end and smooth end.

The post Uninsulated Bend 45 degrees O.K. 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Uninsulated exhaust pipe

 

Square plastic ventilation duct without insulation. Made of high impact polystyrene (HIPS)

Colour: Black

Dimensions - junction box

Type
A-B-C
Standard hp.
100x150 mm over short side
100x150x90 mm
8

The post Uninsulated Bend 45 degrees O.K. 100 x 150 mm first appeared on DUKA Ventilation.

]]> 158920 Uninsulated junction box 100 x 150 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/uninsulated-junction-box-100-x-150-mm/ Mon, 15 Sep 2025 12:40:29 +0000 https://dukaventilation.dk/?post_type=product&p=158896

For the assembly of exhaust pipes. Installed with glue or tape. Remember to seal the joints. Made of high impact polystyrene (HIPS)

The post Uninsulated junction box 100 x 150 mm first appeared on DUKA Ventilation.

]]>

Uninsulated exhaust pipe

 

Square plastic ventilation duct without insulation. Made of high impact polystyrene (HIPS)

Colour: Black

Dimensions - junction box

Type
A-B-C
Standard hp.
100x150 mm
155x105x62 mm
56

The post Uninsulated junction box 100 x 150 mm first appeared on DUKA Ventilation.

]]> 158896 Uninsulated exhaust pipe 100 x 150 x 1000 mm https://dukaventilation.com/products/ventilation-ducts-transition-pieces-beets/trunking-ductwork-and-fittings/uninsulated-pull-off-tube-100-x-150-x-1000-mm/ Mon, 15 Sep 2025 09:35:22 +0000 https://dukaventilation.dk/?post_type=product&p=158568

Square plastic ventilation duct without insulation. Made of high impact polystyrene (HIPS)

The post Uninsulated exhaust pipe 100 x 150 x 1000 mm first appeared on DUKA Ventilation.

]]>

Uninsulated exhaust pipe

 

Square plastic ventilation duct without insulation. Made of high impact polystyrene (HIPS)

Colour: Black

Dimensions - Uninsulated flue pipe

Type
A-B-C
Standard hp.
100x150 mm
1000x150x100 mm
56

The post Uninsulated exhaust pipe 100 x 150 x 1000 mm first appeared on DUKA Ventilation.

]]> 158568