Universal mounting plate for Ø102 – Ø127 – Ø133 – Ø152 – Ø162

Used when the fan does not cover the duct opening, e.g. when installing a fan over an old duct for a flap valve.

The cover plate comes as standard with a Ø102 mm hole, so all Ø100 mm bathroom fans can be mounted on the cover plate.

Easily adapted to a larger pipe dimension (max Ø162) by cutting with a knife in the pre-prepared cutting grooves.

The cover plate is mounted with the cutting grooves facing the ceiling/wall for a neat finish.

Made in matt black foamed PVC

Universal mounting plate for Ø102 – Ø127 – Ø133 – Ø152 – Ø162

Used when the fan does not cover the duct opening, e.g. when installing a fan over an old duct for a flap valve.

The cover plate comes as standard with a Ø102 mm hole, so all Ø100 mm bathroom fans can be mounted on the cover plate.

Easily adapted to a larger pipe dimension (max Ø162) by cutting with a knife in the pre-prepared cutting grooves.

The cover plate is mounted with the cutting grooves facing the ceiling/wall for a neat finish.

Made in matte white foamed PVC

Using the pipe connector ensures a tight installation without gaps between the fan and the ventilation pipe. The connector is mounted (with friction) on the back of the fan and then inserted into the ventilation pipe.

Thermostat RT 100

Thermostat control in white plastic. Can be used in conjunction with most fans. At the set temperature, you can choose whether the fan should start or stop depending on how it is connected.

Regulator ST 700

Stepless speed controller used in connection with duct fan EL 100 VK / EL 125 VK or similar fan. The speed can be adjusted so that the fan runs with less power. This can be a great advantage in connection with e.g. heat transfer systems.

NOTE: If the controller is used with a thermostat, the controller must be connected between the thermostat and the fan.

The controller has a built-in fuse of T 1.6 A, which must only be replaced with the same type of fuse. The Pro product complies with the following CE directives: LDV 73/23/EEC and EMC 89/336/EEC.

Hygrostat ST 500

The hygrostat has an electronic sensor that detects the humidity and automatically starts the fan when the humidity exceeds the set limit. The Pro product complies with the following CE directives: LDV 73/23/EEC and EMC 89/336/EEC.

Closing damper

For installation in Dukas white plastic ventilation pipes in connection with wall-mounted fans when you want to avoid draughts when the fan is switched off.

The damper is intended for wall mounting only.

If the fan is installed in the ceiling, the damper must be removed so that condensation does not collect on the back of the damper, which can then run into the motor and burn it off.

Colour: White

Closing damper

For installation in Dukas white plastic ventilation pipes in connection with wall-mounted fans when you want to avoid draughts when the fan is switched off.

The damper is intended for wall mounting only.

If the fan is installed in the ceiling, the damper must be removed so that condensation does not collect on the back of the damper, which can then run into the motor and burn it off.

Colour: White

Closing damper

For installation in Dukas white plastic ventilation pipes in connection with wall-mounted fans when you want to avoid draughts when the fan is switched off.

The damper is intended for wall mounting only.

If the fan is installed in the ceiling, the damper must be removed so that condensation does not collect on the back of the damper, which can then run into the motor and burn it off.

Colour: White

Cover plate

Used when the fan does not cover the duct opening, e.g. when installing a fan over an old duct for a flap valve. With rubber seal on the back and 4 screws for installation.

Colour: White

Lukkespjæld til EL 600, 700, S7 og S8

Mounted on the outlet pipe of the fan. The damper consists of a clear plastic foil that inflates when the fan is running.

The damper is intended for wall mounting only.

If the fan is installed in the ceiling, the damper must be removed so that condensation does not collect on the back of the damper, which can then run into the motor and burn it off.

Colour: White / clear
Made of PVC.

Dampers may only be placed in horizontal pipes, i.e. for through-wall installations. Shut-off dampers must not be used in ceiling installations.

Front cover

Black front cover that can be mounted on the fan if black suits your interior better.

Colour: Black